8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect

8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series

Vendor: CEN Racing
SKU: CEG8965
Please hurry! Only 0 left in stock
8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series - HeliDirect

8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series

$299.00

8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series

$299.00

This is the CEN Racing Hyper Lube 1/10 Scale 4WD RTR Monster Truck.

ESC-40A WP-1040-Brushed (Powered by HobbyWing):

  • Water-proof and dust-proof for all weather
  • Built-In Capacitor Module
  • Automatic throttle range calibration
  • Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
  • Over-Heat protection and throttle signal loss protection
  • Easily programmed with jumpers

Motor -RS-550 High Torque Motor -Powered By Mabuchi Motor

Servo -12Kg Servo O.E.M. by Savox:

  • 4.8V 0.26 sec/60deg 10.0 kg-cm
  • 6.0V 0.23 sec/60deg 12.0 kg-cm
  • 25T Horn Gear Spline

Radio System:

  • Pistol-Grip Mod-3S 3 Channel Transmitter
  • Digital Trimming
  • Steering Dual-Rate (ST D/R) Adjustment
  • End Point Adjustment (EPA)
  • Built in Failsafe

Power Alarm Chassis:

  • DVP (Dual Vertical Plate) Chassis Design.
  • Sealed Receiver Compartment.
  • Easy Access/Quick Release Battery Tray.
  • Battery Tray Size 146x50x25mm.
  • Adjustable Wheelie Bar Ready (w/Ball Bearing).
  • Full Precision Ball Bearing Support.
  • Adjustable Turnbuckles -Harden Steel Steering Drag Link.
  • Fully Equipped with Allen Hex Screws.
  • Adjustable Body Post .
    - High Torque Servo Saver.
  • Optional 4-Wheel Steering Design.

Suspension:

  • 8 Big Bore Oil Filled Coil Over Shocks.
  • Aluminum Anodized Shock Caps.
  • 10mm over size shock body.
  • 3mm hardened steel polished shaft.
  • Stiff Hard Racing Spring.
  • Fixed Wheelbase.
  • Ride Height- Adjustable with pre-load.
  • Realistic 4-Link Suspension design.

Drivetrain:

  • Sway bar & wheelie bar included.
  • 4 Wheel Drive.
  • Center Shaft Drive Train for more power transferred to the wheels.
  • Highly Efficient Transmission System.
  • Wide Range Easy Changeable Gear Box Design.
  • Sealed transmission eliminates dirt and dust.
  • Sealed Axle housing.
  • 5mm Hardened Steel Axle shaft.
  • Differential Center Locker Front/Rear Planetary Gear Type.
  • Ring & Pinion 30/15T.

Length: 16inch (405mm)
Width: 12.20inch (310mm)
Wheelbase: 10.82inch (275mm)
Ground Clearance: 3.14inch (80mm)
Weight: 4.85 lb. 2.2kg
Wheel: Deep Dish 2.2-inch (55mm) Monster Truck Wheel Tires: Monster Truck V-Pattern Tire 55x136x74mm

Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.Donec pretium egestas sapien et mollis. Pellentesque diam dolor cosmopolis etos lobortis.

Comodous:
Comodous in tempor ullamcorper miaculis
Mattis laoreet:
Pellentesque vitae neque mollis urna mattis laoreet.
Divamus de ametos:
Divamus sit amet purus justo.
Molestie:
Proin molestie egestas orci ac suscipit risus posuere loremous

Related Products

Recently Viewed Products