Note: The front axle uses custom 2-14T gears that do not work with stock and aftermarket gears. The rear axle uses a 2-14T gear that is used with both stock and aftermarket gears. The 2-16T gears included in the package can only be installed...

Note: The front axle uses custom 2-14T gears that do not work with stock and aftermarket gears. The rear axle uses a 2-14T gear that is used with both stock and aftermarket gears. The 2-16T gears included in the package can only be installed...

Description: 1. Made of aluminum alloy and brass. Surface anodized. Front axle 100G, rear axle 50G. 2. lsometric three-section CVD: No jerks when turning at large angles. Maximum steering angle 52°. 3. Front and rear axles install 12-24T gears. Axles support all specifications of...

Description: 1. Made of aluminum alloy and brass. Surface anodized. Front axle 100G, rear axle 50G. 2. lsometric three-section CVD: No jerks when turning at large angles. Maximum steering angle 52°. 3. Front and rear axles install 12-24T gears. Axles support all specifications of...

1. The body is made of PA66 nylon plastic material, which is injected through the mold. Fine detail performance, solid structure, good toughness, light and strong, can protect the remote control car from collision damage. 2. The whole surface is frosted, and the structure...

MEUS Racing SCX24 Metal Isokinetic Front and Rear Axles with 3-Section CVDs and 52° Maximum Steering Angle +5mm wider for 1/24 SCX24 Deadbolt C10 JLU Gladiator Bronco. Key Features: 1. The silver and gold axle housing surfaces are chrome-plated, the blue and purple are...

Red and green are pre-painted colors. raw ABS is the material color, reserved for paint work by the user. So the versions are equipped with a light system. 1. The shell is made of ABS material, the frame is made of nylon and carbon...

Description: Scale 1/24 Shock Appearance & Performance. High Precision CNC Machined Parts. 36mm Extended Length, 26.5mm Collapsed Length. Easy to access bleed valve -adjustable spring preload. Longer travel than stock with same compressed length. High quality billet aluminum construction. Inner o-ring/nylon ring/o-ring to prevent...

Description: 1. 100% Brand New. The tires are made of high quality rubber with foam inserts for excellent traction and grip. 2. 4mm Negative Bias: -4MM Negative Bias wheels keep the wheels away from the center of the vehicle to improve stability, and at...

Red and green are pre-painted colors. raw ABS is the material color, reserved for paint work by the user. So the versions are equipped with a light system. 1. The shell is made of ABS material, the frame is made of nylon and carbon...

Description: 1. 100% Brand New. The tires are made of high quality rubber with foam inserts for excellent traction and grip. 2. 4mm Negative Bias: -4MM Negative Bias wheels keep the wheels away from the center of the vehicle to improve stability, and at...

 

1. The link body is made of stainless steel, sturdy and wear-resistant; 2. The plastic ball end adopts curved ball end design; 3. Avoid friction with the drive shaft, providing smoother running power; 4.The high clearance link set eliminates axle wrapping and unnecessary axle...

Note: The front axle uses custom 2-14T gears that do not work with stock and aftermarket gears 1. Made of aluminum alloy and brass. Surface anodized. Front axle 85G. 2. lsometric three-section CVD: No jerks when turning at large angles. Maximum steering angle 52°....

Note: The front axle uses custom 2-14T gears that do not work with stock and aftermarket gears.  1. Made of aluminum alloy and brass. Surface anodized. Front axle 85G. 2. lsometric three-section CVD: No jerks when turning at large angles. Maximum steering angle 52°....

Features: 1.Analog servo, high sensitivity, low noise. 2.High precision metal gear, longer service life. 3.Upgraded large torque simulation scx24 Emax servo, fast and accurate response. 4.Equipped with metal mount and steering horn, it can replace the original plastic accessories. 5.Suitable for Axial SCX24 Gladiator...

Features:1.CNC maching and anodizing,beautiful appearance.2.Aluminum gearbox housing,hardened steel internal gears.3.Helps prevent dirt and debris from entering the pinion and spur gears for a quiet and efficient drivetrain.4.Suitable for SCX24 Deadbolt AXI90081,B17 AXI00004,C10 AXI00001 AXI00002,JLU,Ford Bronco AXI00006,Jeep Gladiator AXI00005.Weight:20gColor:Black/Red/Silver

Description: Scale 1/18 Shock Appearance & Performance. High Precision CNC Machined Parts. 56mm Extended Length, 40mm Collapsed Length. Easy to access bleed valve -adjustable spring preload. Longer travel than stock with same compressed length. High quality billet aluminum construction. Inner o-ring/nylon ring/o-ring to prevent...

Description:  1. Tires are made of high quality rubber with foam inserts for excellent traction and grip. Wheels are made of brass CNC machined. Single wheel 77G . 2. Negative Bias: -4MM Negative Bias wheels keep the wheels away from the center of the...

MEUS Racing 1.0-inch RC Rubber Tire Set 4 Pcs MS6 RC Tire For 1/18 TRX4M 1/24 SCX24 FCX24 AX24 RC Micro Crawlers. Key Features: 1. Made of super soft & sticky MS6 White-Dot compound from MEUS Racing. 2. Comes with three different types of...