What's Included: 030 55T Motor x 1

HobbyPlus Terranaut 8x8 Optional Metal Drive Shaft Set

Description : - Use for Arktos 6x6 - 1 x Aluminum Skid Plate

Description : - Use for HobbyPlus CR18P-EVO - 4 x 1.2 Steelie Bead Lock Wheel ( Black )

1. The link body is made of stainless steel, sturdy and wear-resistant; 2. The plastic ball end adopts curved ball end design; 3. Avoid friction with the drive shaft, providing smoother running power; 4.The high clearance link set eliminates axle wrapping and unnecessary axle...

Red and green are pre-painted colors. raw ABS is the material color, reserved for paint work by the user. So the versions are equipped with a light system. 1. The shell is made of ABS material, the frame is made of nylon and carbon...

1.Plastic rod ends and brasspivot balls; 2.Links are made of stainless steel, scratch-resistant and wear-resistant; 3.Replace SCX24 stock Y-link, avoid friction with the drive shaft, offer smoother travel; 4.Bent links provide higher clearance when climbing for improved passability; 5.Suit for 24 Rock Crawler Car...

The 160cm x 90cm track for 1:76 scale cars features a large layout with fast lines and technical sections for a new challenge and thrill. Race with friends and enjoy RC car racing any time!The track rolls up for easy transport and storage and can...

Description: 1. CNC aluminum machined, aluminum chrome plating, exquisite and durable. 2. The inner ring is made of brass, which reduces the center of gravity and improves stability. 3. Negative offset -3.25mm. 4. Internal beadlock system, don't need to glue. 5. Fits 7mm hex...

Description: 1. CNC aluminum machined, aluminum chrome plating, exquisite and durable. 2. The inner ring is made of brass, which reduces the center of gravity and improves stability. 3. Negative offset -3.25mm. 4. Internal beadlock system, don't need to glue. 5. Fits 7mm hex...

Only compatible with: Furitek FX118 Fury Wagon and FX118 Katana Features: Steel Overdrive Gears 20% for Front  Only support FURITEK FX118 REMINDER: This overdrive gears only works with stock plastic portal hub cover, it is not compatible with FUR-2421 (Furitek Brass Rear and Front Hub...

MEUS Racing Capra 1.9 Portal Axles Kit with Isokinetic 3-Section CVDs, Ackerman Steering Structure, and 2 Servo Mounts Output shaft 6mm-M4 for 1/10 Axial Capra 1.9 UTB AXI03004 LCG Chassis and DIY SCX10 SCX10 II Upgrades Parts. Key Features: 1. Suitable for Axial 1/10...

2 x HobbyPlus Aluminum Rear Hub For Speck B

What's Included: Idler Gear x 2 42T Spur Gear x 2 45T Spur Gear x 2 11T Pinion Gear x 1 12T Pinion Gear x 1 13T Pinion Gear x 1 Gear Ration Chart Standard Ratio Pinion Gear Main Gear FDR 12T0.5M 45T0.5M 12.85:1...

Special Notes:- The included pinion gear is helical design and is required to install on the motor shaft.- The V3 Rushmore and THunter will have a lower ratio with these gears. If you want to maintain the same gear ratio, you will need to...

Description : - Use for Arktos 6x6 - 1 x Complete Ball Bearing Set (Rubber Seal)

Note: The front axle uses custom 2-14T gears that do not work with stock and aftermarket gears.  1. Made of aluminum alloy and brass. Surface anodized. Front axle 85G. 2. lsometric three-section CVD: No jerks when turning at large angles. Maximum steering angle 52°....

Features:1.CNC machined,two styles of straight axle and portal axle available.2.Equipped with front servo mount,steering links and rear link brace.3.The portal axle adopt widened design,and both sides of the front and rear axles are widened by about 10mm.4.Suitable for SCX24 Deadbolt AXI90081,C10 AXI00001 AXI000025.Servo mount...

Only compatible with: Furitek FX118 Fury Wagon and FX118 KatanaFeatures: Plastic rod ends Steel link balls Made of 304 stainless steel for durability