Description:  1. Check size. Tire Size: Outer Diameter Approx(64mm), Width: Approx(24mm), Drive Hubs: 7mm Hex, Hub diameter(27mm)2. Newly defined size: 1.2 inch Aluminum  wheels and 62mm tread.3. 100% New. Tires made of Quality Rubber with Foam Insert, Features Great Traction and Grip; Plastic Wheel...

Description:  1. Made with high-quality magnets and rotors to provide high-efficiency output. 2. Original motor: 87T/13500RPM/7.4V. MEUS 102T/11500RPM/7.4V. 44T/26500RPM/7.4V ,Compared to the original, the 102T motor reduces speed by 20%, but provides greater torque. 3. The motor uses front and rear double ball bearings for...

MEUS Racing 1.9 Inch MS6 Super Bouncer Soft & Sticky Rubber Tires for 1/10 SCX10 Capra 1.9 UTB TRX4 Redcat Gen8 RC Crawlers. Key Features: 1. Made of super soft & sticky MS6 Orange-Dot compound from MEUS Racing. 2. Aggressive side lug design provides...

MEUS RACING 1/10 Nylon Isokinetic Straight Axles with Front Axle Counterweight for Axial Capra II SCX10 II and Other DIY 1/10 RC Crawler. Key Features: 1. MEUS RACING 1/10 Nylon Isokinetic Straight Axles with Front Axle Counterweight for Axial Capra 1.9 UTB, AR44, AR45...

MEUS Racing Capra 1.9 Portal Axles Kit with Isokinetic 3-Section CVDs, Ackerman Steering Structure, and 2 Servo Mounts Output shaft 6mm-M4 for 1/10 Axial Capra 1.9 UTB AXI03004 LCG Chassis and DIY SCX10 SCX10 II Upgrades Parts. Key Features: 1. Suitable for Axial 1/10...

MEUS Racing RC Car LED Lights Roof Light Bar Kit 1/10 1/8 Scale RC Accessories for Axial SCX10 90046 Wraith Traxxas TRX4 TRX6 Redcat Gen8 1/10 1/8 RC Crawler Upgrades Parts. Key Features: 1. Great add-on light accessories for 1/10 1/8 RC cars, suitable...

Features: 1. Made of high quality steel to increase wear resistance and extend service life;  2.Precision CNC machined steel structure, stable and durable;  3.Perfectly match the original gearbox, easy to install; 4. Reduction ratios: 40.3:1(underdrive 59%) 5.Motor Gear:11T 6.Package includes: gear*4; 3×6× 2.5 bearing*6; 3×16...

Features:1.CNC maching and anodizing,beautiful appearance.2.Aluminum gearbox housing,hardened steel internal gears.3.Helps prevent dirt and debris from entering the pinion and spur gears for a quiet and efficient drivetrain.4.Suitable for SCX24 Deadbolt AXI90081,B17 AXI00004,C10 AXI00001 AXI00002,JLU,Ford Bronco AXI00006,Jeep Gladiator AXI00005.Weight:20gColor:Black/Red/Silver

Description: 1. Made of high quality metal with high strength. 2. Cross-knot structure allows for greater steering and stronger torque. 3. When installing, use the equipped bearings to replace the steering knuckle bearings. 4. Suitable for SCX24 Stock Axles C10 JEEP gladiator. 5. Package...

Description: 1. Made of high-quality metal material, sturdy and durable； 2. The R clip is slightly bent to make it easy to remove or install. 3. Suitable for most 1/18 1/16 1/24 RC model cars trucks buggies. 4. Package Includes: R-clips*100pcs.

This light set is for our ripper cage and body.Two 8mm high brightness headlights.The light bar is metal structer,strong and firm.Intergrated control circuit,the receiver takes power,plug,and play. RGB full-color lamp beads,8 kinds of lighting effects. 4.5 to 20V ultra-wide voltage. Power off memory,save mode.It's...

Made of brass material. High precision CNC machined. Suit for 1/18 Scale TRX-4M Bronco Defender Upgrade Parts. Fit both front and rear axles

1.Plastic rod ends and brasspivot balls; 2.Links are made of stainless steel, scratch-resistant and wear-resistant; 3.Replace SCX24 stock Y-link, avoid friction with the drive shaft, offer smoother travel; 4.Bent links provide higher clearance when climbing for improved passability; 5.Suit for 24 Rock Crawler Car...

Features: 1.Aluminum CNC processing,exquisite and durable. 2.With double screw holes, the spacing can be adjusted by moving the installation position of the base, and the adjustable spacing is 23-24 mm.3.Suitable for Emax es08ma servo and original servo.Weight: 5G

Features: 1.Made of steel,CNC hardened steel structure，sturdy and durable. 2.There are lengths in total, 3 combinations:Type A: for SCX24 Deadbolt AXI90081 ，B17 AXI00004. Type B:for SCX24 C10 AXI00001 AXI00002, JLU,Ford Bronco AXI00006.Type C:for SCX24 Gladiator AXI00005.Size and weight：A: 34-40MM+56-81MM；20GB: 45-58MM+56-81MM；21G C: 45-58MM+69-95MM；23GThe package includes:2*drive...

CNC Aluminum Front and Rear Axle for SCX24 90081 C10 JEEP Features:1. CNC machined,two styles of straight axle and portal axle available.2. Equipped with front servo mount,steering links and rear link brace.3. The portal axle adopt widened design,and both sides of the front and...

Features:1.CNC machined, aluminum anodized finish.Replace the original plastic links.2.Suitable for 1/24 SCX24 Jeep Gladiator AXI00005.3.Note:Please check size before purchase.Color: Black/Red/SilverMaterial：Aluminum AlloyWeight：20g.

Description:  1. Check size. Tire Size: Outer Diameter Approx(64mm), Width: Approx(24mm), Drive Hubs: 7mm Hex, Hub diameter(27mm)2. Newly defined size: 1.2 inch Aluminum  wheels and 62mm tread.3. 100% New. Tires made of Quality Rubber with Foam Insert, Features Great Traction and Grip; Plastic Wheel...

Description:  1. Suitable for steering servo of SCX24 and TRX4M, and also compatible with shifting servo of 1/10 and 1/8 models. 2. Brushless motor provides high speed response and high torque. 3. Supports voltage range of 6-8.4V, providing 8.5KG torque. 4. High-precision metal gears...

Description:  1. Suitable for steering servo of SCX24 and TRX4M, and also compatible with shifting servo of 1/10 and 1/8 models. 2. Brushless motor provides high speed response and high torque. 3. Supports voltage range of 6-8.4V, providing 8-12.5KG torque. 4. High-precision metal gears...