MEUS Racing SCX24 Metal Isokinetic Front and Rear Axles with 3-Section CVDs and 52° Maximum Steering Angle +5mm wider for 1/24 SCX24 Deadbolt C10 JLU Gladiator Bronco. Key Features: 1. The silver and gold axle housing surfaces are chrome-plated, the blue and purple are...

1.The material and look:made of aluminum,red, silver, black anodized, very bright colors and beautiful appearance; 2.Machining:this is a CNC machined piece with accurate data and you can notice, each of its parts fits perfectly;  3.Replace the stock plastic parts, more robust and durable;  4.Suitable...

Note: This parts and the wheel hex adaptor counterweight(SKU No. TRX4M-B02)cannot be used at the same time.Interference will be generated after installation, please use it separately. 1.Made of high quality brass for added strength and durability； 2.Heavier brass ，26g per side，reduces the vehicle's center of gravity and...

1. The link body is made of stainless steel, sturdy and wear-resistant; 2. The plastic ball end adopts curved ball end design; 3. Avoid friction with the drive shaft, providing smoother running power; 4.The high clearance link set eliminates axle wrapping and unnecessary axle...

Features: 1.Servo mount is made of aluminum,CNC machined and anodized,exquisite and durable; 2.Equipped with 2 stainless steel steering links; 3.Place the servo horizontally,give a lower center of gravity for your TRX-4m； 4.Not applicable to original frame； 5.The original axle link mount needs to be...

1.The transmission housing is made of aluminum,with bright colors and beautiful appearance; 2.The internal gears are made of high quality steel to increase wear resistance and extend service life; 3.CNC machined piece with accurate data (16.6:1); 4.Replace the stock parts, more robust and durable;...

Features: 1. Made of high quality steel to increase wear resistance and extend service life;  2.Precision CNC machined steel structure, stable and durable;  3.Perfectly match the original gearbox, easy to install; 4. Reduction ratios: 9.69:1(overdrive 71%) 5.Motor Gear:11T 6.Package includes: gear*4; 3×6× 2.5 bearing*6; 3×16...

1. The body is made of PA66 nylon plastic material, which is injected through the mold. Fine detail performance, solid structure, good toughness, light and strong, can protect the remote control car from collision damage. 2. The whole surface is frosted, and the structure...

1. Made of metal, anodized. Beautiful and durable. 2. Steering knuckle, tiller bracket, differential cover use brass material, effectively increase the weight of the front axle. Improve passing performance. 3. Drive shaft uses neutral carbon steel material, metal gears, strong and durable. Gear ratio...

1. Brass servo machine bracket to add some weight to the front axle. By adjusting the servo mounting ears, the mounting distance 3.5&7MM adjustment can be realized 2. Support to install 8 linkage or triangle type linkage. 3. Aluminum alloy servo horn, sturdy and...

1. Use high quality aluminum alloy material and steel gears, surface oxidation treatment, sturdy and durable.2. Can control the servo through CH3 and manually switch gears two programs. Use CH3 control program original factory remote control does not work together.3. High speed 15.7:1, low...

1. Use high quality aluminum alloy material and steel gears, surface oxidation treatment, sturdy and durable.2. Can control the servo through CH3 and manually switch gears two programs. Use CH3 control program original factory remote control does not work together.3. High speed 15.7:1, low...

Features:--Brand new and high quality--Made of high quality material, durable and wear-resistant--High precision machining, stable and reliable--Replacement the original damaged parts, ensures long lifetime and better work performance--Innovative design and superb workmanship make your RC car look more realistic, exquisite and outstanding simulation look,...

Features: 1.Made of steel,CNC hardened steel structure，sturdy and durable. 2.There are lengths in total, 3 combinations:Type A: for SCX24 Deadbolt AXI90081 ，B17 AXI00004. Type B:for SCX24 C10 AXI00001 AXI00002, JLU,Ford Bronco AXI00006.Type C:for SCX24 Gladiator AXI00005.Size and weight：A: 34-40MM+56-81MM；20GB: 45-58MM+56-81MM；21G C: 45-58MM+69-95MM；23GThe package includes:2*drive...

Features:1.CNC machined, aluminum anodized finish.Replace the original plastic links.2.Suitable for 1/24 SCX24 Jeep Gladiator AXI00005.3.Note:Please check size before purchase.Color: Black/Red/SilverMaterial：Aluminum AlloyWeight：20g.

Features:1.CNC machined,two styles of straight axle and portal axle available.2.Equipped with front servo mount,steering links and rear link brace.3.The portal axle adopt widened design,and both sides of the front and rear axles are widened by about 10mm.4.Suitable for SCX24 Deadbolt AXI90081,C10 AXI00001 AXI000025.Servo mount...

Description: 1. This is a aluminum shock mount with beautiful appearance;  2. CNC machining with accurate data,can be perfectly matched with the original car; 3. Add multiple mounting holes for adjusting the height of the shock and adjusting the center of gravity of the...

Description: 1. The wheel hex hub is made of brass to increase weight, lower the vehicle's center of gravity and improve the vehicle's anti-roll performance; 2. Universals and axle are made of steel for durability; 3. Universals can provide smoother action and 45 degree...

Description: 1. The wheel hex hub is made of brass to increase the weight, the width is 10mm, compared to the stock parts increased by 3mm, widen the body, lower the center of the vehicle, improve the stability of driving. 2. The matching stub...

Description: 1. Made of high quality metal with high strength 2. Cross-knot structure allows for greater steering and stronger torque. 3. When installing, use the equipped bearings to replace the steering knuckle bearings. 4. Suitable for SCX24 MEUS Plastic Portal Axle and Aluminum Portal...