Description:  1. Check size. Tire Size: Outer Diameter Approx(64mm), Width: Approx(24mm), Drive Hubs: 7mm Hex, Hub diameter(27mm)2. Newly defined size: 1.2 inch Aluminum  wheels and 62mm tread.3. 100% New. Tires made of Quality Rubber with Foam Insert, Features Great Traction and Grip; Plastic Wheel...

Description: 1. Made of high-quality metal material, sturdy and durable； 2. The R clip is slightly bent to make it easy to remove or install. 3. Suitable for most 1/18 1/16 1/24 RC model cars trucks buggies. 4. Package Includes: R-clips*100pcs.

Description:  1. Suitable for steering servo of SCX24 and TRX4M, and also compatible with shifting servo of 1/10 and 1/8 models. 2. Brushless motor provides high speed response and high torque. 3. Supports voltage range of 6-8.4V, providing 8.5KG torque. 4. High-precision metal gears...

Description:  1. Suitable for steering servo of SCX24 and TRX4M, and also compatible with shifting servo of 1/10 and 1/8 models. 2. Brushless motor provides high speed response and high torque. 3. Supports voltage range of 6-8.4V, providing 8-12.5KG torque. 4. High-precision metal gears...

Features: 1.These 1.0 beadlock wheels are designed with a combination of outer ring brass and inner aluminum alloy，with MEUS logo,black coating gives it a better appearance while preventing corrosion;  2.The brass material adds low end weight,lower the center of gravity,keeps stability;  3.Thickening design of...

Features:1.Made of stainless steel,sturdy and durable;2.Has precise tolerances and can perfectly replace the original screws;3.Replace the stock bushings with bearings for smoother operation；4.Includes all bearings and screws for TRX-4M; detailed list as shown in the picture.Weight:100gMaterial: SteelPackage: Boxed

Note: This parts and the wheel hex adaptor counterweight(SKU No. TRX4M-B02)cannot be used at the same time.Interference will be generated after installation, please use it separately. 1.Made of high quality brass for added strength and durability； 2.Heavier brass ，26g per side，reduces the vehicle's center of gravity and...

Features: 1.Servo mount is made of aluminum,CNC machined and anodized,exquisite and durable; 2.Equipped with 2 stainless steel steering links; 3.Place the servo horizontally,give a lower center of gravity for your TRX-4m； 4.Not applicable to original frame； 5.The original axle link mount needs to be...

Description:  1. Made with high-quality magnets and rotors to provide high-efficiency output. 2. Original motor: 87T/13500RPM/7.4V. MEUS 102T/11500RPM/7.4V. 44T/26500RPM/7.4V ,Compared to the original, the 102T motor reduces speed by 20%, but provides greater torque. 3. The motor uses front and rear double ball bearings for...

Description:  1. Made of metal, it is beautiful and durable. 2. Suitable for 1/24 SCX24 and 1/18 TRX4M models. 3. The fixing screw is fixed with M1.4. Please make sure that the diameter of the holes in the front and rear bumpers meets the...

Description: 1. Made of high quality stainless steel, scratch and wear resistant. 2. Effective protection of chassis and front rear axles. 3. Exquisite appearance, accurate data and easy installation. 4. Suitable for 1/18 TRX4M.

Description: 1. Made of high-quality metal material, sturdy and durable； 2. The R clip is slightly bent to make it easy to remove or install. 3. Suitable for most 1/18 1/16 1/24 RC model cars trucks buggies. 4. Package Includes: R-clips*100pcs.

1.The transmission housing is made of aluminum,with bright colors and beautiful appearance; 2.The internal gears are made of high quality steel to increase wear resistance and extend service life; 3.CNC machined piece with accurate data (16.6:1); 4.Replace the stock parts, more robust and durable;...

Features: 1. Made of high quality steel to increase wear resistance and extend service life;  2.Precision CNC machined steel structure, stable and durable;  3.Perfectly match the original gearbox, easy to install; 4. Reduction ratios: 9.69:1(overdrive 71%) 5.Motor Gear:11T 6.Package includes: gear*4; 3×6× 2.5 bearing*6; 3×16...

1.The set shell is made of aluminum alloy. It is sturdy and durable. 2.Reduction gears are made of 16.9:1 metal gears, 180 87T motor, and carbon fiber battery holder. 3.Kit is highly integrated, easy to build ripper or aftermarket frame. 4.Suitable for 1/18 TRX4M...

1.The light bar shell is made of metal with exquisite appearance. 2.Equipped with 16LED lemon yellow light bar and 8MM headlight. High brightness. Power on and always light up. Easy to build your ripper. 3.Suitable for TRX4M Ripper V1 V2 . 4.Package includes 16LED...

1. Brass servo machine mounts to add some weight to the front axle. It can also adjust the front and rear clearance of the servo. 2. By adjusting the servo mounting ears, the mounting distance of 3.5MM can be moved. 3. Aluminum alloy servo...

1.Adopting high quality steel, precision machining and high temperature hardening treatment. 2.Helical gears offer greater strength and smooth operation than the factory spur gears 3.Higher transmission efficiency, less noise, withstand greater torque force, speed increase of 9% 4.Suitable for 1/18 Bronco Defender RC Crawler...

Description: 1. Fender is rubber material, printed with logo, exquisite and realistic;  2. Use stainless steel bracket fixed, strong and durable;  3. The original car hole non-destructive installation, simple and convenient; 4. Make your car more realistic and attractive; 5. Suitable for 1/18 TRX4M...

1.The material and look:made of aluminum,red, silver, black anodized, very bright colors and beautiful appearance; 2.Machining:this is a CNC machined piece with accurate data and you can notice, each of its parts fits perfectly;  3.Replace the stock plastic parts, more robust and durable;  4.Suitable...